Les dernières nouvelles de Jucheng CNC Machining, y compris les acquisitions de nouveaux équipements, les agrandissements d'installations, la participation à des salons professionnels et les actualités en matière de certification.
An aircraft bleed-air duct flange is the interface where duct sections, valves, or equipment connect within a hot-air system. It must maintain the defined sealing geometry while transferring mechanical loads…
An inlet guide vane is a stationary aerodynamic component positioned in an engine flow path. It can turn or condition incoming air before the next stage, so its airfoil profile,…
An aircraft rudder pedal assembly brings together pedals, pivot arms, cross-shafts, adjustment hardware, linkage interfaces, and floor or support structure. Its quality is experienced as controlled movement, but the manufacturing…
An aircraft cargo tie-down fitting links cargo restraint equipment to the aircraft floor or a structural track. It must mate with the specified restraint system, transfer load into the approved…
An aileron bellcrank changes the direction and ratio of movement between control-system links. Its pivot axis and arm-hole locations form a controlled kinematic relationship. A machined bellcrank can meet every…
A flight-control pushrod end fitting closes the mechanical connection between a rod and another control-system component. Its threads, bearing or clevis interface, adjustment range, and locking features must work as…
An aircraft control horn converts motion from a linkage into rotation or translation at a control surface. Its hole pattern and lever geometry therefore form part of a controlled kinematic…
A wing stringer clip connects a skin or panel to a longitudinal stiffener, transferring load through a small interface that can be easy to under-specify. The clip’s job depends on…
A rocket engine injector plate contains a pattern of passages and openings whose geometry is tied to a controlled propulsion design. The manufacturing challenge is to preserve that geometry, its…
An avionics tray in a launch vehicle is an equipment interface, a structural support, and part of the vehicle’s service and integration plan. Its function is not simply to hold…
