S235JR Structural Steel CNC Machining | EN 10025 European Standard Parts

S235JR European Structural Steel Machining

S235JR is the most widely used non-alloy structural steel in the European standard EN 10025. The name itself defines its properties: "S" for Structural, "235" for the minimum yield strength (MPa), and "JR" indicating it meets impact testing requirements at 20°C. It is the European equivalent to ASTM A36 or Q235B. At JUCHENG, we recognize that global projects require global material standards. We stock and machine certified S235JR plates and profiles, delivering heavy-duty brackets, machine bases, and welded assemblies that fully comply with European engineering specifications.

Obtenir un devis

Mild Steel S235JR。

JUCHENG's S235JR Fabrication Capabilities

Processing structural steel often involves large-scale fabrication. We offer:

Large Gantry Milling: Since S235JR is often used for large machine bases, we utilize gantry CNC mills (up to 3 meters) to face, drill, and tap huge structural weldments.
Soudage certifié: S235JR is designed to be welded. Our ISO-certified welders use MIG/MAG processes to fabricate complex frames before precision machining.
Préparation de la surface: As a hot-rolled steel, S235JR comes with mill scale. We offer Sandblasting and Grinding services to prepare the surface for painting or galvanizing.

Galvanizing Services: For outdoor construction parts, we provide Hot-Dip Galvanizing post-machining to ensure long-term rust protection.

Advantages of CNC Machining S235JR

Avantage	Description détaillée	Avantage clé
Soudabilité supérieure	Low carbon and manganese content ensures excellent fusion without cracking.	The ideal choice for fabricated frames, chassis, and welded assemblies.
Bonne formabilité	Can be cold formed, bent, and rolled without breaking.	Suitable for brackets that require both machining and bending.
Impact Tested (JR)	Guaranteed impact energy (27 Joules) at room temperature (20°C).	Provides reliable toughness for construction and machinery applications.
Rentabilité	High availability and low raw material cost.	Economical for massive, heavy parts where material weight is high.
Polyvalence	Available in plates, tubes, beams, and angles.	Can be machined from diverse stock forms to minimize waste.

Paramètres techniques et normes de matériaux

Understanding the European designation:

Catégorie de qualité	Spécification	Caractéristiques et utilisations idéales
S235JR	Material No. 1.0038	Characteristics: Hot rolled structural steel. Tensile strength 360-510 MPa. Good ductility. Surface usually has mill scale (black/blue). Uses: Building structures, bridge components, vehicle chassis, machine base plates.
Nuances équivalentes	ASTM A36 / Q235B	Characteristics: While chemical compositions vary slightly, these are generally considered interchangeable for non-critical structural applications. Uses: General heavy industry.

CNC Machining Guidelines for S235JR

Élimination de la calamine: The hard oxide scale on hot-rolled S235JR can wear out tools. We often face-mill the skin first with tough inserts before finishing.
Détensionnement: Large welded S235JR frames contain residual stress. We recommend Stress Relief Annealing before final machining to ensure flatness and dimensional stability.
Tolérances: Due to internal stresses in hot-rolled steel, holding microns is difficult. Standard machining tolerances (+/- 0.05mm) are recommended over precision grinding tolerances.
Corrosion: It will rust rapidly. Parts must be oiled, painted, or galvanized immediately.

Scénarios d'application

Construction: Crane outriggers, structural joints, anchor plates.
Machines lourdes: Excavator buckets, bulldozer frames, agricultural plow beams.
Énergie: Wind tower flanges, pipeline supports.
Industrial Automation: Robot riser bases, conveyor system frames.

Tableau des propriétés physiques

Typical Mechanical Properties for S235JR:

Propriété	Valeur	Unité
Limite d'élasticité	235 (Min)	MPa
Résistance à la traction	360 - 510	MPa
Allongement	26	%
Résistance aux chocs	27J @ 20°C	(JR Grade)
Densité	7.85	g/cm³
Soudabilité	Excellente	-

Demandez votre DFM et devis – Téléchargez vos dessins

ㆍRemplissez vos exigences et téléchargez vos fichiers 2D et 3D, nous vous fournirons votre devis de projet et DFM sous 24 heures.

ㆍTypes de fichiers : STEP, STP, IGES, IGS, SLDPRT, 3DM, SAT, X_T, DWG, DXF, STL, PDF, ZIP et plus. Taille du fichier : < 128 Mo Taille de la pièce : < 1500*1500*1500 mm
ㆍConfidentialité : Nous respectons votre vie privée. Vous trouverez ici un exemple d' accord de non-divulgation. En soumettant ce formulaire, vous acceptez nos conditions générales et notre politique de confidentialité.